PEUGEOT Recalls

2024–2025 PEUGEOT 3008 & 5008 3008 ALL HEV Auto, 3008 GT BEV Auto, 3008 GT HEV Auto, 5008 ALL HEV Auto, 5008 GT HEV Auto

Due to a manufacturing defect, the ball joint brackets mounting bolts on the front lower suspension arm may break. This may cause the wheel to change direction and result in a loss of vehicle control.

2024–2025 PEUGEOT Partner & Expert E-EXPERT PRO LNG, E-PARTNER PRO LNG EV AT, EXPERT PRO LNG DIESEL AUTO, EXPERT PRO SHT DIESEL AUTO, PARTNER PRO LNG 1.2 PT AT8, PARTNER PRO SHT 1.2 PT AT8

Due to a software issue, the Instrument Panel Cluster (IPC) may fail to illuminate the visual vehicle speed, lane keep assist and Advanced Emergency Brake System (AEB deactivation warning).

2018–2022 PEUGEOT 3008 (P84), 5008 (P87) 3008 GT 2.0 HDI 180 S&S EAT8, 3008 SUV 2.0 HDI GT 130 AT8, 3008 SUV GT 2.0 HDI AT, 5008 GT 2.0 HDI 180 S&S EAT8, 5008 SUV 2.0 HDI GT 130 AT8, 5008 SUV GT 2.0 HDI AT

Due to a software issue, the Selective Catalytic Reduction (SCR) may not operate as intended. This could result in the AdBlue low level warning light not illuminating. A software update is required to ensure the correct operation of the warning light.

2015–2018 PEUGEOT 308 Wagon (T92) 308 5DR TOUR ALL 110KW BHDI AT, 308 5DR TOUR ALL 110KW THP AT, 308 5DR TOUR PRE 110KW BHDI AT, 308 5DR TOUR PRE 110KW THP AT

The upper anchorage points for the seatbelts in the second-row left and right-hand seating positions may not meet load specifications. As a result, the seat belt may not operate as intended.

2024–2025 PEUGEOT 308 (P5), 408 (P54), 2008 (P24), 3008 (P64), 5008 (P74) 2008 ALLURE SUV HEV AUTO, 2008 GT SUV HEV AUTO, 3008 ALL SUV HEV AUTO, 3008 GT SUV HEV AUTO, 308 GT HATCH HEV AUTO, 408 GT FASTBACK HEV AUTO, 5008 ALLURE SUV HEV AUTO, 5008 GT SUV HEV AUTO

Due to a manufacturing defect, the threaded connection between the high-pressure fuel pump and the fuel rail may become loose. If this occurs, fuel may leak in the presence of an external ignition source and could result in a vehicle fire.

2023 PEUGEOT e2008, ePartner E-2008 GT SUV EV AT, E-PARTNER PRO LNG EV AT

Due to a software issue, the Battery Monitoring Unit (BMU) in vehicles equipped with a high voltage battery may be defective. As a result, it could cause invalid cell voltage and incorrect temperatures leading to a sudden loss of motive power and/or engine stalling whilst driving.

2024 PEUGEOT 308 & 408 308 GT BEV, 308 GT Hatch / Wagon, 408 GT Fastback

Due to a software issue, the Door Control Unit (DCU) for the drivers and front passenger doors may not operate as intended. As a result, it could prevent the doors from locking or unlocking, exterior mirrors from folding or adjusting and the windows from auto reversing. In addition, when the vehicle has been parked for an extended period, the vehicle transmission may lock in Park position and unable to move the vehicle forward.

2023 PEUGEOT Partner Pro LWB, Pro SWB

Due to a software issue within the Engine Management Control (EMC) unit, the Hydraulic Brake Compensation (HBC) system may not operate as intended. This could lead to reduced braking performance and a loss of braking assistance.

2021–2022 PEUGEOT Expert Premium 2.0HDI AT8

Due to a software issue in the Engine Control Unit (ECU), the Selective Catalytic Reduction (SCR) system may not operate as intended. If this occurs, the instrument panel warning light will not illuminate and the urea injection emission control system may not operate resulting in an increase of tailpipe emissions.

2018–2022 PEUGEOT 3008/5008 3008 GT, 5008 GT

The Diesel Particulate Filter (DPF) may crack due to overheating. If this occurs the DPF may not operate as intended resulting in an increase of tailpipe emissions.

2018–2019 PEUGEOT 3008/5008 3008 GT, 5008 GT

The Diesel Particulate Filter (DPF) may crack due to overheating. If this occurs the DPF may not operate as intended resulting in an increase of tailpipe emissions.

2017–2020 PEUGEOT 308, 208, 2008 2008 A94, 208 A90, 308 T9

The timing belt may degrade due to aged engine oil. If left unrepaired it may result in a reduction or a loss of braking performance.

2021–2022 PEUGEOT 3008, 508 3008 GTS PLUG-IN HYBRID AWD, 508 GT FASTBACK PLUG-IN HYBRID

Due to a manufacturing issue, certain plug-in hybrid electric vehicles may not have had the High Voltage battery reinforcing plate or battery cover coated with a protective wax. If water intrudes, there is a risk of perforation or corrosion of the battery reinforcing plate/battery cover over the life of the vehicle.

2021–2022 PEUGEOT 3008, 508 3008 GTS PLUG-IN HYBRID AWD, 508 GT FASTBACK PLUG-IN HYBRID

Due to a software program error, the Battery Management System software may cause the high voltage battery to overheat and/or emit smoke.

2021–2022 PEUGEOT Expert (K0) EXPERT PREMIUM L.E 2.0 HDI AT8

Due to an assembly line issue, the fuel pipe installation may not meet manufacturing specifications and could become damaged due to movement between the pipe, the body and the protective cover. If left unrepaired, this may result in diesel fuel leaking from the damaged pipe which could result in a vehicle fire.

2019 PEUGEOT Boxer

The steering pivot joint bolts may not meet manufacturing specifications and may become loose. If the joint becomes loose the steering may deviate from its desired trajectory.

2016 PEUGEOT 4008

There may be insufficient engagement of the parking brake, due to excessive internal tolerances of the rear brake calipers.

2014–2017 PEUGEOT 208, 2008, 308

The braking system’s power assistance may be lost or reduced. This is due to a reduction of available vacuum in the system due to degradation of the timing belt if affected by aged engine oil.

2018–2019 PEUGEOT EXPERT IV

The fuel supply and return pipes located under the body may become damaged over time due to relative movement between the pipes and the body guidance ribs.

2018–2019 PEUGEOT EXPERT VANS

The fuel supply and return pipes located under the body may become damaged over time due to relative movement between the pipes and the body guidance ribs.

2018–2019 PEUGEOT EXPERT

The rear brake hose may become damaged over time, due to relative movement between the hose and holding clip.

2018–2019 PEUGEOT 5008

The tightening torque of the spare wheel support mountings might not meet specifications, which may cause the spare wheel to become loose and risk falling off.

2018–2019 PEUGEOT 3008

A top tether anchorage point has been incorrectly fitted on the front passenger seat, allowing a child seat to be installed.

2018–2019 PEUGEOT EXPERT (VANS)

The front central passenger seat belt could unclip from the buckle when braking or avoiding obstacles.

2012–2015 PEUGEOT P4008

On affected vehicles, one of the parts in the internal play compensator mechanism in the rear brake calliper may no longer work in the long term.

2012–2015 PEUGEOT 4008 SUV

On affected vehicles, the parking brake lever and actuating spindle on the rear callipers may be corroded. These parts contribute to engaging the parking brake, the effectiveness of which could be reduced in the long term if the parts are corroded.

2009–2012 PEUGEOT P4007

The front windscreen wiper motor venting device may allow water to enter the wiper motor, causing corrosion and motor failure.

2017–2018 PEUGEOT 308, 3008 & 5008

On affected vehicles, the cooling strategy and maximum temperature alert might cause engine overheating.

2015 PEUGEOT 4008

The right hand door locks may not be to the manufacturer's specifications. The internal mechanism of one or more locks may jam, which could prevent one or more doors from closing or result in unexpected unlocking and opening.

2015 PEUGEOT P4008

The door locks may not be to the manufacturer's specifications. The internal mechanism of one or more locks may jam, preventing one or more vehicle doors from closing or result in unexpected unlocking and opening.

2014–2015 PEUGEOT P308

On affected vehicles, the cooling strategy and maximum temperature alert might cause engine overheating.

2016–2017 PEUGEOT P3008

A possible non-compliance on some vehicles of the fuel pipes positioned near an aerodynamic shield that could generate friction between the pipe and shield eventually causing a fuel leak.

2014–2015 PEUGEOT P4008

A power relay may overheat, resulting in a relay failure.

2012–2014 PEUGEOT P4008

In specific vehicles the windscreen wiper motor venting device may be non-compliant. This may allow water to enter the wiper motor, creating internal corrosion and locking up the motor.

2014–2017 PEUGEOT P308 & P508

The starter motor 12V connection lug may be fitted incorrectly and may touch a metal component, causing a short circuit.

2015 PEUGEOT 308

The front wishbone bolts may not be to the correct specification and may break.

2012–2015 PEUGEOT 4008

An insufficient anti corrosion coating was applied to the end cap on the outer tube of the tailgate gas springs, which may cause corrosion.

0 PEUGEOT 508

The internal component of a non-compliant electrical relay might disrupt the starter control, damaging the relay by overheating.

2015 PEUGEOT P308

The affected vehicles have tyre valves fitted that could be defective, resulting in a loss of tyre pressure.

2014–2015 PEUGEOT 4008

The affected vehicles equipped with continuously variable transmission may experience a delay in the vehicle's acceleration.

0 PEUGEOT P308 T9

The injectors’ fuel supply rail may pose a leak risk in the long-term.

0 PEUGEOT P308

The door locks could have a manufacture flaw potentially causing the internal mechanism of one or more locks to jam, which could prevent one or more vehicle door(s) from closing, or expose them to unexpected unlocking and opening.

0 PEUGEOT P2008

On affected vehicles, the travel of the parking brake lever might have been incorrectly set. This situation could lead to the parking brake being ineffective unless the customer pulls up the lever all the way.

0 PEUGEOT PEUGEOT P4007

An electronic component in the built-in systems interface (BSI) is potentially faulty, leading to malfunctions of certain electrical equipment, such as the radio/navigation, windscreen wipers, lighting or the triggering of instrument panel warning lights.

0 PEUGEOT P308 T9

On affected vehicles, the front suspension wishbone mounting bolts could exhibit a non-compliance , which can lead to the mounting bolts breaking.

0 PEUGEOT Peugeot 308 T9

The front suspension wishbone bolts may not be to the correct specification.

0 PEUGEOT 208 and 2008

The front suspension wishbone fixing bolts may not be to the correct specification.

0 PEUGEOT P3008/P5008

Affected vehicles may exhibit friction wear on the driver's seat wiring harness. potentially causing an electrical malfunction or localised overheating.

0 PEUGEOT 508

The connection between the fuel return pipes and the injectors may have been damaged during assembly in the factory.

2010 PEUGEOT 207

There is a chance that the battery earth cable dimensions are not correct resulting in excess tension to the cable, possibly causing the cable to break.

0 PEUGEOT 308

The steering rack assembly may have been incorrectly tightened.

0 PEUGEOT 207

There is a chance that the battery earth cable dimensions are not correct resulting in excess tension to the cable, possibly causing the cable to break.

0 PEUGEOT 308, 508

A software error may lead to the engine stalling in certain driving conditions.

0 PEUGEOT 207

There is a possibility that the battery's negative cable is incorrect in length.

0 PEUGEOT 308, 3008, RCZ

Possible contact between the fuel return pipe and the fuel filter support bracket.

0 PEUGEOT 207

It is possible for the rear brake calliper hose to come into contact with the rear suspension spring which, over time, could wear the hose.

0 PEUGEOT 307, 308, 407

The valve on the vacuum pump in the brake assistance circuit may have a manufacturing non-conformity.

0 PEUGEOT 307, 308, Expert

These vehicles had a previous safety recall campaign to download new lighting control software to the management system. There is a possibility that this software upgrade did not complete satisfactorily and therefore, the vehicle requires the latest software upgrade to be performed.

0 PEUGEOT 407

There is a possibility of the wiring harness coming into contact with the cooling fan blade causing damage to the harness.

0 PEUGEOT 308

There is a possibility for the seat backrest to fold inadvertently when adjusting the seat position and seat position sensor failure.

0 PEUGEOT EXPERT

This campaign consists of inspecting the fuel return pipe and the engine styling cover (soundproofing) for traces of wear on the pipes from the cover.

0 PEUGEOT EXPERT

This campaign consists of inspecting the fuel return pipe and the engine styling cover (soundproofing) for traces of wear on the pipes from the cover.

0 PEUGEOT 308

In rare cases the bonnet may require replacing if the striker is found to be insufficiently secured.

0 PEUGEOT 407

The recall campaign is to fit an air vent pipe in the vacuum circuit of affected vehicles. This pipe will prevent possible deterioration in braking assistance over a period of time.

0 PEUGEOT 307, Expert

The recall campaign consists of downloading a new version of vehicle exterior lighting software which is necessary to prevent the lighting switch position from being incorrectly detected by the lighting management system. In rare cases this may cause the exterior lights to inadvertently cut out with no action taken by the driver.

0 PEUGEOT 308

The recall of the affected vehicles is to replace the Brake Master Cylinder. This action is necessary to eliminate the possible deterioration of braking efficiency under certain operating conditions.

0 PEUGEOT 308

The recall of the affected vehicles is to replace the Brake Master Cylinder. This action is necessary to eliminate the possible deterioration of braking efficiency under certain operating conditions.

2008 PEUGEOT 308 Partner

It is possible that the incorrectly specified power steering pump may have been fitted during production. In rare cases this may cause some stiffness in the operation of the steering. Replacement of the electric power steering pump will only be performed if the unit fails the check.

0 PEUGEOT 308

There is a chance that the alternator wiring harness may be incorrectly positioned and be rubbing on the metal bracket which is bolted to the engine beside the alternator.

0 PEUGEOT 207, 307, 308 and 407

The Engine Relay Unit is incorrectly specified and could deteriorate over time and cause various operating faults and in rare cases may lead to the failure of other equipment.

0 PEUGEOT 206

Over a period of time the screen wiper mechanism could become defective.

0 PEUGEOT 308

The incorrectly specified Relay Unit could deteriorate over time and cause various operating faults and in rare cases may lead to the failure of other equipment.

0 PEUGEOT 407

Affected vehicles require the changing of a valve on the vacuum pump in the brake assistance circuit. This component may have a manufacturing non-conformity which in time could alter the braking assistance.

0 PEUGEOT 407

Affected vehicles require the changing of a component within the vacuum pump in the brake assistance circuit. This component may have a manufacturing non conformity which in time could alter the braking assistance.

0 PEUGEOT 306

There is a chance of the fuel filler pipe connection hose leaking due to wear.

0 PEUGEOT 207 DV6

On the Peugeot 207 fitted with the EP6 engine and automatic gearbox, the engine management software can, in very rare cases, generate an unnecessary entry into defect mode, which severely restricts the engine power output.

0 PEUGEOT 307

A component may have a manufacturing non-conformity which in time could alter the braking assistance.

0 PEUGEOT 407

The current incorrect position of the check valve which could lead to a leakage of oil into the brake servo causing damage to the membrane of the brake servo and deteriorate the braking assistance.

0 PEUGEOT 407

The current incorrect position of the check valve could lead to a leakage of oil which could damage the membrane of the brake servo and deteriorate braking assistance.

0 PEUGEOT 307

A component of the vacuum pump in the brake assistance circuit may have a manufacturing non-conformity which in time could alter the braking assistance.

0 PEUGEOT 206, 307

The engine coolant temperature sensor may be cracked. This could cause the engine coolant temperature warning light to come on inadvertently and in rare cases may cause engine operating faults.

0 PEUGEOT 206, 307

The engine coolant temperature sensor may be cracked. This could cause the engine coolant temperature warning light to come on inadvertently and in rare cases may cause engine operating faults.

0 PEUGEOT 407 ES9A, DW10

Risk of vehicle overheating or in rare cases, the extreme overheating of the cooling fan motor causing fire.

0 PEUGEOT 407 DT17

An excess of material in the return pipe may restrict the flow of fuel back to the tank.

0 PEUGEOT 307

In rare cases the rear cross-member and the rear small side members do not comply with manufacturer's specifications.

0 PEUGEOT 407 Coupe

The original engine managment software can, in rare cases, cause the engine to stall in cold temperatures.

0 PEUGEOT 307

In rare cases, the Exhaust Gas Recirculation Valve (EGR) may cause hard starting/stalling and cause the engine diagnostics warning light to illuminate on the instrument panel.

0 PEUGEOT 407

In rare cases, the Exhaust Gas Recirculation Valve (EGR) may cause hard starting/stalling and cause the engine diagnostics warning light to illuminate on the instrument panel.

2005–2006 PEUGEOT 407

Intermittent hard starting/stalling problems and the illumination of the engine check light.

0 PEUGEOT 307

The engine management software can, in rare cases, cause imperfect management of the engine fuel supply which could lead to engine damage.

0 PEUGEOT 307

The brake pipe cradle can rub the adjacent brake pipe causing a loss of fluid.

0 PEUGEOT 407

Rare occurence of the inadvertent operation of the starter motor.

0 PEUGEOT 307

Replacement of Plush Velour Floor Mats if fitted to vehichle, to eliminate the possible risk of the floor mat coming into contact with the accelerator pedal.

0 PEUGEOT 307

Oscillation of the motorised throttle valve may cause breakage of the throttle stop. The engine may be placed in the emergency program phase (limp mode) with a possible reduction in braking assistance.

0 PEUGEOT 407

This campaign consists of fitting a strengthener plate to the removable towing ring rear support. In the exceptional situation where the rear support has been strengthened it may come away from the vehicle if used for towing purposes.

0 PEUGEOT 607

The anti-theft wheel locking bolt kit needs to be replaced to eliminate the risk of damage to the bolts making it more difficult to remove the wheel using the anti theft key.

0 PEUGEOT 306

Possible fuel leaks caused from wear and tear in the fuel filler neck connection pipe.

0 PEUGEOT 206 EW10J4S

ECU software download is necessary to eliminate oscillation of the motorized throttle valve which, in extremely rare cases, may cause breakage of the throttle stop. As a result, the engine may be placed in the emergency program phase (limp mode) with a program error.

0 PEUGEOT 206

BSI Software Download. This action is necessary to eliminate the possible inadvertent continuous activation of the horn after pressing the high frequency button on the vehicles remote locking plip. This activation my cause destruction of the horn.

0 PEUGEOT 206

Software Download for Engine ECU. This action is necessary to eliminate oscillation of the motorized throttle valve which, in extremely rare cases, may cause breakage of the throttle stop. As a result, the engine may be placed in the emergency program phase.

0 PEUGEOT 307

Download Engine ECU Software. This action is necessary to eliminate oscillation of the motorized throttle valve which, in extremely rare cases, may cause breakage of the throttle stop. As a result, the engine may be placed in the emergency program phase.

0 PEUGEOT 307

Safety recall to check and, if necessary, replace the front suspension pivot(s) and pivot ball joint(s). This action is necessary to eliminate the risk of a vehicle trajectory outside the manufacturer's specifications.

0 PEUGEOT 607

The modification is designed to eliminate any risk of a short circuit in the electrical system in the case where the battery negative cable has rubbed on the air conditioning piping.

0 PEUGEOT 206

The standard design of clips on the brake pedal and booster actuating rod may not be fitted correctly.

2001–2003 PEUGEOT 406

There is a risk of incorrect deployment of the lateral air bags and the pre-tensioners during a serious vehicle accident.

0 PEUGEOT 307

There is a risk that the left-hand front anti-roll bar linkage may come into contact with the brake pipe.

0 PEUGEOT 206 Multiplex

Possible risk of the Steering Column Shroud being misaligned causing the ignition key to be held in the starter motor cranking position.

0 PEUGEOT 306/406 Hdi

Possibility of water entry into the engine management solenoid valve operating circuit.

0 PEUGEOT 306

Possible risk of rear brake hose damage due to a heat shield not installed during the vehicle manufacturing process.

0 PEUGEOT 406

Possible loss of braking assistance due to the brake vacuum pipe and the engine wiring loom coming into contact and wearing through.

0 PEUGEOT 306

Front seatbelt pretensioners can be deactivated because of a wiring harness fault under the front seats.

0 PEUGEOT 306

The power brake vacuum pump drive pin may become defective under extreme and continuous braking operation resulting in loss of vehicle braking.

0 PEUGEOT 206 GTI

A possibility exists that vehicle braking imbalance may occur due to incorrect specification tyres fitted to the vehicle (Continental 195/55R15) which do not comply to the vehicle ADR approvals.

0 PEUGEOT 306

Loss of vehicle braking due to power brake vacuum pump drive pin becoming defective under extreme and continuous braking operation.

0 PEUGEOT 206

The lateral side air bags may deploy inadvertantly.

0 PEUGEOT 206

Potential Fuel Leakage From The Fuel Filter In Front Of The Rear Right Hand Wheel.

1999 PEUGEOT 306/406 MY99

If The Brake Pedal Is Applied Several Times In Close Succession It May Result In The Loss Of Braking Power Assistance.

1997–1998 PEUGEOT 306 and 406

May Have Been Fitted With An Incorrect Specification Spare Wheel.

0 PEUGEOT 406

Fuel Hose In The Engine Bay To Be Replaced To Prevent Possible Leakage Of Fuel And The Further Possibility Of Leaked Fluid Catching Fire If Exposed To Certain Elements.

0 PEUGEOT 306

Possibility Of Incorrect Tension Of Steering Rack Assembly Mounting Bolts During Vehicle Assembly.

0 PEUGEOT 406

Possibility Of Deformed Wheel Rims Which May Cause Premature Tyre Deflation.

0 PEUGEOT 306XT, XR, XSI, GT16

A Lower Ball Joint Swivel Pin May Not Have Been Tightened To The Correct Torque Specification Which May Lead To Ball Joint Failure.

0 PEUGEOT 306

Potential Starter Motor Harness Short Circuit In The Engine Bay.

0 PEUGEOT 306

Potential Brake Fluid Loss At The Rear Brake Pipe.

0 PEUGEOT 306

Potential Fuel Leakage And Further Possibility Of Leaked Fluid Catching Fire If Exposed To Certain Elements.

0 PEUGEOT 306

Possibility Of Drive Belt Losing Tension Resulting In The Loss Of Power Steering Assistance.

0 PEUGEOT 306XR, XT, ST, XSi, STDT, S16

Possibility That The Air Bag Rotary Connector Can Become Damaged Due To A Malfunction Of The Units Locking Pin Causing The Air Bag Electrical Circuit To Fail.

0 PEUGEOT 306XR, XT, ST, XSi, S16, Cabriolet

Possibility That The Main Wiring Harness May Be Affected By Contact With The Body Which Could Cause An Electrical Short Circuit.

0 PEUGEOT 205 GTI JAZ

Possibility That A Defect Exists In The Fuel Injection Rail Which Could Cause A Fuel Leak Within The Engine Bay.

0 PEUGEOT 405

May Be Possibility Of Insufficient Clearance Between The Fuel Injection Hoses And Certain Ignition Components Resulting In Fuel Leakage.

0 PEUGEOT 405

Instances Of Fuel/power Steering Fluid Leakage Which May Catch Fire If Exposed To Certain Elements Of The Ignition System Or Heat From The Exhaust System.

0 PEUGEOT 405

A Possibility Exists Whereby The Lower Suspension Arm Bracket May Not Be Adequately Secured To The Suspension Subframe In All Instances.

0 PEUGEOT 405 Mi16

Possibility Of An Electrical Failure That Would Render The Vehicle Immobile.