Vehicle Recalls
5,501 recalls from vehiclerecalls.gov.au
Cars, trucks, motorcycles, trailers, and caravans affected by safety defects.
Vehicle Recalls results
REC-003665
active0 SUZUKI GSX-S1000A/FA & GSX-R1000A
The front brake caliper may exhibit some fluid leakage due to an uneven piston seal surface, caused by entry of the outer coating treatment into the piston bore during production.
Motorcycle
18 Nov 2015
REC-003558
active0 SUZUKI GSX-R1000
The front brake caliper may exhibit some fluid leakage due to an uneven piston seal surface, caused by entry of the outer coating treatment into the piston bore during production.
Motorcycle
17 Nov 2015
REC-000586
active0 Honda CIVIC HATCH
Selected Honda Civic Hatch vehicles were installed with owner's manuals specified for EU vehicles.
Light Vehicle
13 Nov 2015
REC-001281
active0 Toyota Lexus ES350 GSV60 and ES300h AVV60
ES350 & ES300h vehicles equipped with Pre-Collision System (PCS), there is a possibility that the system could interpret a steel expansion joint or plate that crosses the road surface as an object. If this occurs, the system may sound the warning buzzer and may automatically apply the brakes.
Light Vehicle
13 Nov 2015
REC-003662
active0 FOTON TUNLAND
On a number of vehicles, the front brake pads display excessive amounts of thermal expansion, resulting in the brakes dragging under certain conditions.
Heavy Vehicle
13 Nov 2015
REC-005088
active0 ATECO Foton
It has been found that some vehicles with a vehicle jack that does not comply with the mandatory standard for vehicle jacks AS/NZS 2693:2007, due to incorrect labeling.
Heavy Vehicle
12 Nov 2015
REC-001027
active0 MITSUBISHI MQ Triton Double Cab
Inappropriate length rivets may have been supplied with the accessory soft tonneau cover kit. Some kits contained 14mm long rivets instead of the required17mm length.
Light Vehicle
11 Nov 2015
REC-003661
active0 FOTON Foton Tunland
All Foton Tunland vehicles have been supplied with a vehicle jack that does not comply with the mandatory standard for vehicle jacks AS/NZS 2693:2007, due to incorrect labeling.
Light Vehicle
11 Nov 2015
REC-000638
active0 INDIAN FULL SIZE MOTORCYCLES
The Rear Brake Master Cylinder piston seal could develop a tear.
Motorcycle
9 Nov 2015
REC-001280
active0 Toyota Camry, Aurion, Corolla, Yaris, RAV4 & Kluger
The sliding electrical contacts in the driver's side power window master switch may have been lubricated with insufficient quantity of grease. During normal operation, wear residue from the electrical contact points can accumulate between the terminals where the grease was insufficiently applied.
Light Vehicle
8 Nov 2015
REC-003660
active0 MASERATI Quattroporte (M156)
Maserati is recalling Quattroporte (M156) vehicles to replace the alternator-starter wiring harness. The protective sealing cover on the electrical connection of the engine power cable to the starter motor is potentially installed the wrong way.
Light Vehicle
6 Nov 2015
REC-000262
active2014-2016 DUCATI Multistrada 1200 and 1200S
The side stand for supporting the parked motorcycle in an upright position could break at the joining weld.
Motorcycle
4 Nov 2015
REC-001146
active0 PORSCHE Macan S/Macan Turbo
There is a possibility that the low pressure fuel line under the hood can leak at the connection point
Light Vehicle
3 Nov 2015
REC-000529
active0 Holden Captiva 5 and Captiva 7
The label on the jack supplied with the vehicle identifies a ‘safe working load’, which is not permitted by the mandatory standard for jacks if the jack is intended for use with a specific vehicle.
Light Vehicle
2 Nov 2015
REC-001416
active2015-2016 VOLKSWAGEN Scirocco R
On Scirocco R vehicles, of a certain production period, the speed indicated does not reflect the true speed of the vehicle. The difference occurs between 100 km/h and 180 km/h.
Light Vehicle
2 Nov 2015
REC-000555
active0 Honda GL 1800
After prolonged exposure to certain types of brake fluid, a reaction may occur between the fluid and the brake hose material. The resultant 'residue' can obstruct the return gallery of the secondary brake master cylinder, causing it to bind and overheat.
Motorcycle
30 Oct 2015
REC-003664
active0 Scania SCANIA
A deviation has been detected in the joint between the two halves of the spring brake chambers in the parking brake circuit. The deviation may cause the spring brake chambers to split at the flange, which affects the safety of the vehicle.
Heavy Vehicle
30 Oct 2015
REC-003655
active0 Ford F250 and F350
The affected vehicles have not had a steering damper fitted during conversion.
Heavy Vehicle
28 Oct 2015
REC-000867
active0 Mazda Mazda 121, Mazda 323, Eunos 30X, Mazda 626, Mazda 929, Mazda MPV
An excessive amount of grease may have been applied to the electrical contacts inside the ignition switch. The grease may carbonise due to a heat from the electric arc generated during switch operation. The carbonised grease may accumulate between the electrical contacts (moving contact and fixed contact), reducing the electrical insulation performance inside the switch.
Light Vehicle
27 Oct 2015
REC-003659
active0 Mercedes-Benz MERCEDES S63 COUPE
The front seatbelts may have been incorrectly fitted during production. This may affect the locking behaviour of the belt and result in incorrect operation of the seatbelt pre tensioning system.
Light Vehicle
26 Oct 2015
REC-003663
active0 Scania SCANIA
There have been instances of the steering wheel making contact with the steering column when the steering wheel has been adjusted to its lowest position and is turned at the same time.
Heavy Vehicle
26 Oct 2015
REC-003658
active0 NISSAN D23 NAVARA
The child restraint system (CRS) top tethers may fail in extreme loading scenarios.
Light Vehicle
23 Oct 2015
REC-000398
active0 Hino Hino 300 Series
In the subject vehicles, the fuel filter element installed on the engine may crack if the engine is started and stopped frequently as durability of the fuel filter element is not enough to endure changes in the fuel pressure.
Heavy Vehicle
22 Oct 2015
REC-000399
active0 Hino HINO 300 SERIES
In the ACU (Automatic Clutch Unit) of the transmission of the Hybrid trucks equipped with AMT (Automatic Manual Transmission): 1) The water sealing grommets may be deformed and cause water to enter the actuating motors due to incorrect layout of the wires. This may hinder the smooth movement of the brushings causing the warning light to come on, and in the worst case scenario, the brushings may become stuck and the clutch may become inoperable. 2) The actuator brushings may wear prematurely if the vehicle is started and stopped frequently due to inadequate programming of the control software. This may cause the warning light to come on, and if continued to be used without reprogramming, the clutch may become inoperable.
Heavy Vehicle
22 Oct 2015