Search Recalls
Search by VIN for an instant check, or filter by make, model, year, or category.
5,433 recalls found
REC-004968
active2016–2021 Ford Ranger and Everest
The mounting bolts that are used for the Rhino Rack Sunseeker awning may not meet manufacturing specifications and could break. If the bolts break this can lead to the awning becoming detached.
Light Vehicle
30 Sept 2021
REC-001708
active2021 ROYAL Meteor 350, Bullet 500 and Classic 500
The ignition coil may fail, which may cause the vehicle to experience misfires. This could lead to a reduction in expected performance, loss in power and/or an electrical short circuit.
Motorcycle
29 Sept 2021
REC-004957
active2014–2020 DUCATI Monster Monster 1200 (MA), Monster 1200 R (MA), Monster 1200 S (MA), Monster 821 (M6), Monster 821 (MH)
The rear brake hoses may not meet manufacturing specifications and could be susceptible to heat damage, which may result in a sudden loss of rear braking performance. The front brake will continue to function as expected.
Motorcycle
29 Sept 2021
REC-004963
active2012–2013 PORSCHE Boxster (981) and Cayman (981)
Due to a manufacturing defect, the rear suspension may fail in extreme driving situations. Should the suspension fail, this will impact vehicle handling which could result in a loss of vehicle control.
Light Vehicle
29 Sept 2021
REC-004960
active2012–2020 Jayco Journey & Starcraft Caravan 16.51-3.OB
The VIN plate fitted may display incorrect load rating and tyre specifications. The incorrect information on the VIN plate might result in inappropriate tyres to be fitted.
Caravan/Motorhome
23 Sept 2021
REC-004962
active2021 VOLKSWAGEN Passat
The threaded nut connecting the brake servo and brake pedal may not meet manufacturing specifications. Should the threaded nut become loose the brake pedal will no longer function leading to a reduction in braking performance and handling of the vehicle.
Light Vehicle
23 Sept 2021
REC-004961
active2019–2021 CHRYSLER Chrysler 300 (LX)
The adhesive that holds the windshield in place may not meet manufacturing specifications, this may result in the windshield not being adequately secured to the vehicle.
Light Vehicle
20 Sept 2021
REC-004958
active2020 Mercedes-Benz GLC, E and EQC
The electrical connectors of the side crash sensors may not meet manufacturing specifications. These sensors are used to determine when to deploy the airbags in the event of an accident. If the sensors do not operate as designed, it may result in a delay in the operation of the airbags.
Light Vehicle
20 Sept 2021
REC-004956
active2020–2021 VOLVO TRUCKS FM (4)
The airbag control unit may not have been fitted correctly during manufacturing, this could result in an unintentional deployment of the airbag.
Heavy Vehicle
16 Sept 2021
REC-004950
active2019–2020 Honda CBR500R, CB500F and CB500X - 19 Year Models
Due to a manufacturing issue with the anti-lock braking system (ABS) module it is possible that excess grease may adhere to internal components. Continued use of the motorcycle, without addressing this issue, may cause an internal pressure leak, which could lead to increased braking distances.
Motorcycle
15 Sept 2021
REC-004953
active2021 SUZUKI Jimny (model A6G415)
Due to improper assembly of an oil seal in the automatic transmission, fluid may leak from the transmission which could result in a loss of drive.
Light Vehicle
15 Sept 2021
REC-004954
active2021 SUZUKI Jimny A6G415
Due to improper assembly of an oil seal in the automatic transmission, fluid may leak from the transmission which could result in a loss of drive.
Light Vehicle
15 Sept 2021
REC-004955
active2019–2021 MERCEDES BENZ VS30 Sprinter
The jack provided with the vehicle does not comply with the mandatory standard for vehicle jacks 'Trade Practices Act 1974 Consumer Protection Notice No. 1 of 2010 Consumer Product Safety Standard for Vehicle Jacks'. The jack base plate dimensions does not meet the requirements of the standard.
Light Vehicle
15 Sept 2021
REC-004952
active2019–2021 AUDI e-tron
Due to a manufacturing issue with a braking component the Anti-Lock Brake System (ABS) and Electronic Stabilisation Control (ESC) function may fail under hard braking.
Light Vehicle
14 Sept 2021
REC-001693
active2017–2020 FUSO LDT Canter FEA21 & FEB21
On some vehicles, it has been identified grease was not applied to the slide pins of the front wheel brake calipers. If the outer Brembo brake pad is continually used under the defect conditions, it cannot be fully returned after the brake operation and wear is accelerated. In worst case, the outer pad may detach from the vehicle.
Heavy Vehicle
13 Sept 2021
REC-004951
active2015–2019 Mercedes-Benz A, C, CLA, GLA and GLC Class
The panel located between the windshield and the panoramic sunroof of your vehicle may not have been bonded correctly during a prior service repair. The bonding might deteriorate gradually over time and could lead the panel either partially or fully detaching from the vehicle.
Light Vehicle
13 Sept 2021
REC-001709
active2019–2021 Toyota GR Supra GR Supra GT, GR Supra GTS
The vacuum pump which supports brake assistance (brake boost) may become damaged under certain engine start conditions caused by the engine management software. This may cause a reduction in braking performance.
Light Vehicle
13 Sept 2021
REC-001707
active2020 Mercedes-Benz Actros
The lock nut at the strike button on the portable fire extinguisher may not be mounted. If the fire extinguisher is activated and no lock nut is present, the strike button assembly, with integrated piercer is ejected under pressure from the fire extinguisher.
Heavy Vehicle
13 Sept 2021
REC-004947
active2020–2021 KAWASAKI 20-21MY ZR1000K (Z-H2),20-21MY ZX1002B/D (H2 SX), 21MY ZX1002J (H2), 21MY ZX1002L/N (ZX10R/RR)
Due to improper assembly of the oil pressure relief valve it may fail and the engine may become insufficiently lubricated. This may result in a reduction of engine performance and a possible engine seizure, this could also lead to the rear wheel locking-up.
Motorcycle
13 Sept 2021
REC-004948
active2020–2021 GASGAS EC 250, EC 300 and EC 250F, EC 350F
On MY21 and MY22 bikes the front brake caliper locking split pins used to mount and secure the front brake pad holding bracket may have been fitted in the wrong direction. If the locking pins are fitted in the wrong direction this can result in the locking pins coming out and cause the brake pad holding bracket to become detached. Resulting in a loss of front braking performance.
Motorcycle
13 Sept 2021