Search Recalls
Search by VIN, keyword, make, or filter by recall type, year, and vehicle category.
Search results
872 recalls found
REC-000751
active0 KAWASAKI ZG1400A8F, ZG1400A9F, ZG1400CAF, ZG1400CBF, ZG1400CCF
Due to the gap between the rear brake pedal and the guard, small stones or other road debris may become trapped between the brake pedal and the guard.
Motorcycle
20 Aug 2012
REC-003447
active0 ADLY ST125
The product's identification plate displays the incorrect vehicle category. In addition, the headlamp may not meet regulated requirements and the noise label fitted to the scooter may be incorrect.
Motorcycle
13 Aug 2012
REC-003445
active0 DUCATI 1199 Panigale
The following defects may occur: Exhaust Valve Bowden Cable Heat Protector: Under extreme conditions, the plastic protector could melt or burn, producing smoke and noxious fumes. Steering Damper Retaining Screws and Ball Joint: Under extreme conditions and after heavy wear, the steering damper may come loose. Rear Fork Fastening Bolts: The bolts need re-tightening to new factory torque standards. Front Brake Reservoir Connecting Tubes: After extended rubbing against the reservoir retaining screw, the connection tube could wear out and produce a slight fluid leak.
Motorcycle
6 Aug 2012
REC-000257
active2012-2013 DUCATI Diavel
The side-stand of the motorcycle may bend, and under extreme circumstances, break in the area near the rotation pivot.
Motorcycle
6 Aug 2012
REC-000798
active2008-2012 KTM 300 EXC
Due to an incorrect heat treatment process, the inner tubes for the front forks may crack.
Motorcycle
25 June 2012
REC-004890
active2007-2012 KTM 990 Super Duke R
There have been reports of breakage of the steering damper clamp on 3 vehicles in other markets.
Motorcycle
25 June 2012
REC-003435
active0 DUCATI 1199 Panigale
Some motorcycles may have been fitted with the incorrect retaining bolt linking the swingarm to the rear suspension linkage rod.
Motorcycle
21 June 2012
REC-003433
active0 Bosch F026A054683YK-SK3012 and F026A091343YX-SK2012
The park brake may engage by itself on trailers fitted with these parts.
Motorcycle
12 June 2012
REC-003431
active0 SUZUKI GSX-R1000
Suzuki Motor Corporation has identified that securing bolts of the side stand switch body may loosen due to temperature expansion and contraction which results in the reduction in the tension applied to the side stand switch. Should the side stand switch bolts loose tension, the switch operation cannot be assured which may result in the engine stopping when engaging a gear other then neutral.
Motorcycle
28 May 2012
REC-003426
active0 DUCATI M1100, M796, 848, F848
Due to to use of inferior brake-pad material, the rear brake may not function adequately under heavy braking.
Motorcycle
3 May 2012
REC-003422
active0 CAN-AM Spyder
A pin securing the brake pedal connecting rod could disengage and eventually fall off. This could cause a total loss of main brake function without prior warning.
Motorcycle
27 Apr 2012
REC-005310
active2011-2012 BMW S 1000 RR motorcycle
BMW Motored has found that there have been a few, isolated cases of engine damage occurring at high engine rpm. This was caused by conrod bolts working loose.
Motorcycle
22 Apr 2012
REC-000375
active0 HARLEY DAVIDSON Dyna and Softail
The brake lines may develop a leak due to an issue with the material used for the inner liner.
Motorcycle
26 Mar 2012
REC-000747
active2008-2012 KAWASAKI Ninja ZX-10R and Ninja ZX-6R
Excessive heat within the circuit board and uncontrolled electric current output may result in insufficient charging to the motorcycle battery.
Motorcycle
9 Mar 2012
REC-000256
active2011-2012 DUCATI Monster 1100EVO
The rear wheel of the motorcycle may develop structural problems due to a non-conformity with the fabrication standards.
Motorcycle
4 Mar 2012
REC-003417
active0 SUZUKI AN400AL2, AN650AL2 and DL650AL2
Under some circumstances, improper current flow inside the brake lamp switch may occur. This may result in the brake lamp failing to correctly illuminate and the engine to fail to start.
Motorcycle
17 Feb 2012
REC-000255
active2010-2012 DUCATI Monster and Hypermotard
There is a possible non-conformity in the fuel system line that could cause fuel leakage.
Motorcycle
5 Feb 2012
REC-001539
active0 YAMAHA YZF-R125
During normal use, the bolts securing the side stand safety switch to the side stand bracket may become loose and fall out.
Motorcycle
2 Feb 2012
REC-001547
active0 YAMAHA XVS950AY, XVS950AZ, XVS950AA, XVS1300AW
In affected models, there may not be a proper seal between the fuel pipes for the fuel injectors and the fuel hose that connects them. Pressurised fuel can begin leaking at the point where the hose connects to the fuel pipe.
Motorcycle
15 Nov 2011
REC-003394
active0 VICTORY Jackpot, Kingpin, Vegas
Victory has determined that the backrest support bracket on some of these accessory seats can fail and allow the passenger backrest to separate from the seat base.
Motorcycle
2 Nov 2011