Search Recalls
Search by VIN, keyword, make, or filter by recall type, year, and vehicle category.
Search results
872 recalls found
REC-004581
active0 TOOWOOMBA FOUNDRY Brake Drums
The Incorrect Marking Related To The Maximum Machining Size Cast On The Outside Diameter Of Each Drum. The Maximum Machining Size Applies When The Drum Is Removed From A Vehicle And Re-machined To Restore Integrity Of The Braking Surface.
Heavy Vehicle
20 Dec 1999
REC-004580
active0 Scania Dennis Dart
Failure Of The Fixing Stud In The Front Axles Can Occur And If Not Attended To The Second Stud Could Fail Leading To Loss Of Directional Control Of The Vehicle.
Heavy Vehicle
8 Dec 1999
REC-004575
active0 Caterpillar Excavator
Starter Cable Interference Which May Result In Electrical Arc And /or Short Circuit.
Heavy Vehicle
7 Dec 1999
REC-004551
active0 Volvo FL7, FL10, FL12
Possible Breakage Of The Cabin Tilt Bracket Which May Result In Severe Injury And/or Death If In Front Of The Cabin While Tilting Or When Tilted.
Heavy Vehicle
3 Nov 1999
REC-004563
active0 Caterpillar Reclaimers
The Propel Speed Select, Steering Mode Select And Parking Brake Contact Blocks May Fail Under Certain Conditions.
Heavy Vehicle
8 Oct 1999
REC-004559
active0 Caterpillar 3116 MUI Truck Engines
Engine Rpm Instability Resulting In Engine Stalling At Low Idle Or Engine Surging.
Heavy Vehicle
1 Sept 1999
REC-004557
active0 Caterpillar Scrapers
The Brake Drums May Fail Resulting In Loss Of Braking Performance.
Heavy Vehicle
27 Aug 1999
REC-004553
active0 Caterpillar Compactors
Drive Shaft Bolts May Come Loose.
Heavy Vehicle
10 Aug 1999
REC-004549
active0 Caterpillar Backhoe
The Starting System May Fail Due To Moisture Ingress Into The Key Switch.
Heavy Vehicle
4 Aug 1999
REC-004517
active0 International Turbo Daily
The Brake Vacuum Hose Can Be Damaged By The Rotating Pulley Of The Air Conditioner Compressor Causing The Loss Of Vacuum Assisted Braking Resulting In Very High Pedal Effort To Apply The Brakes.
Heavy Vehicle
26 July 1999
REC-004522
active0 Caterpillar Generator Set
A Failure Of Internal Componentry Can Lead To The Failure Of The Entire Circuit Breaker If Tripped While Under Load, Possibly Leading To Hazard Of Electric Shock, Burn Or Explosion.
Heavy Vehicle
5 July 1999
REC-004523
active0 Howard Porter 1000 Tailgate Lift
The Bottom Link Arms Do Not Have Sufficient Design Capacity To Comply With Australian Standard 1418.
Heavy Vehicle
1 July 1999
REC-004525
active0 Scania 4 Series
The 15 A Voltage Converter Has An Internal Failure That May Cause A Fire In The Radio Shelf.
Heavy Vehicle
4 June 1999
REC-004496
active0 Kenworth Airglide 200 Suspension
Failure May Occur Of The Torque Rod Pin That Assists In The Location Of The Rear Drive Axles,
Heavy Vehicle
19 May 1999
REC-004513
active0 Caterpillar Telehandler
The Priority Valve Adaptor Needs To Be Changed As Under Certain Conditions During Rapid Steering A Temporary Loss Of Brakes And Hydraulic Functions May Occur.
Heavy Vehicle
16 Mar 1999
REC-004505
active0 Caterpillar Wheel Loaders
The Lift Cylinder Rod Could Experience A Weld Failure.
Heavy Vehicle
25 Feb 1999
REC-005219
active0 KIA Ceres Light Trucks
The Centre Seat Belt May Have A Faulty Tongue And/or Mounting Plate Which May Fail Due To Insufficient Strength.
Heavy Vehicle
23 Feb 1999
REC-004498
active0 Scania K124
A Defective Internal Thread In The Oil Cleaner Housing May Cause The Shaft In The Oil Cleaner To Come Loose And Then The Oil Pressure Forces The Shaft, The Rotor Bowl And The Cover Out Of The Housing And The Engine Oil Flushes Over The Turbo Charger.
Heavy Vehicle
23 Feb 1999
REC-004497
active0 Scania SKS200-L03
The Rubber Cover For The 30 Connection At The Starter Motor Solenoid Has Been Of An Incorrect Material Which Is Conductive And May Cause A Fire If The Starter Cables Are Mounted Improperly.
Heavy Vehicle
17 Feb 1999
REC-004506
active0 Scania Trucks
The Screw Joints For The Spare Wheel Carrier May Fail Due To Screw Joint Settling And The Torque Decreasing.
Heavy Vehicle
10 Feb 1999