Vehicle Recalls
5,504 recalls from vehiclerecalls.gov.au
Cars, trucks, motorcycles, trailers, and caravans affected by safety defects.
Vehicle Recalls results
REC-003351
active0 SUZUKI GSX-R600,GSX-R750,GSF650,GSF1250,GSX650F,GSX1300BK,GSX1300R,GSR600,VLR1800
Some regulator/rectifier assemblies were produced with insufficient adhesion between the power module and the rectifier case. Due to the insufficient adhesion, heat generated from the power module can cause it to lift from the case. This condition can cause excessive heat in the module which can result in insufficient charge being provided to the battery.
Motorcycle
1 Mar 2011
REC-000702
active0 JAYCO Motorhomes
There should have been a glass splash back fixed to the kitchen wall to protect the wall from heat generated by the cooker.
Caravan/Motorhome
25 Feb 2011
REC-000165
active2008-2009 CHRYSLER Dodge Journey (DC)
The front door wiring harness on your vehicle may fatigue and break. Broken wires could interrupt circuts for the side impact sensor(s), resulting in the illumination of the airbag warning lamp and loss of sensing capability.
Light Vehicle
25 Feb 2011
REC-000577
active2008-2010 Honda City, Jazz Hatch
The sliding portion between the lost motion spring and rocker arm is not sufficiently lubricated for high surface pressure setting at low engine speed, potentially causing breakage of the auxiliary spring during usage.
Light Vehicle
24 Feb 2011
REC-003352
active0 Motospecs Drivetech Wheel Bearing Kit
The internal dimension of the press fit collars may be oversized, reducing the locking capacity of the collar.
Light Vehicle
24 Feb 2011
REC-001250
active0 SUZUKI Grand Vitara
The engine drive belt tension adjuster pulley, which maintains tension of the engine drive belt for various ancillaries, has been found to potentially have an incorrectly manufactured internal spring.
Light Vehicle
18 Feb 2011
REC-000363
active2010 HARLEY DAVIDSON Softail
On vehicles fitted with these kits, the Body Control Module (BCM) has a case that may not be sealed sufficiently to prevent water intrusion. Water intrusion of the BCM may lead to an engine stall.
Motorcycle
17 Feb 2011
REC-001560
active2002-2008 Ford Falcon, Fairlane, LTD, FPV
A bonding condition may exist with the glass panel on the sunroof.
Light Vehicle
4 Feb 2011
REC-000468
active2002-2006 Holden AH Astra,V2 Monaro,VX, VY, VZ Commodore,Monaro,WH, WK WL Statesman & Caprice
A bonding condition may exist with the glass panel on the sunroof.
Light Vehicle
4 Feb 2011
REC-001559
active2009-2011 Ford PJ, PK Ranger
The cruise control system may not operate correctly.
Light Vehicle
1 Feb 2011
REC-003347
active0 LEXUS IS250
Due to insufficient tightening of the fuel pressure sensor connected to the engine fuel delivery pipe with Nickel Phosphorus plating, there is a possibility that, over time, the pressure sensor could loosen.
Light Vehicle
1 Feb 2011
REC-003348
active0 CITROEN C4, C4 Picasso, C5 II, C5 (X7) & Dispatch
The braking assistance circuit vacuum pump valve in very rare cases may have problems opening.
Light Vehicle
31 Jan 2011
REC-000251
active2009-2010 DUCATI MTS 1200
In certain conditions (downshifting or manoeuvring with the clutch disengaged with the engine at idle) it is possible that the engine may stall.
Motorcycle
30 Jan 2011
REC-003346
active0 CITROEN C5
The front wiper blade motors have an internal non-conformity.
Light Vehicle
17 Jan 2011
REC-000373
active0 HARLEY DAVIDSON XL883N, XL883C
Some of these models may have been shipped with an incorrect Australian ADR 83/00 Stationary Noise label part number.
Motorcycle
11 Jan 2011
REC-000576
active0 Honda Jazz
There is insufficient margin set for the length of an electric wire connected to the headlight switch. As a result, the terminal joint portion moves, contact resistance increases, the terminal generates heat, and the coupler melts.
Light Vehicle
6 Jan 2011
REC-000652
active2006-2007 ISUZU N Series
The eye bolt securing the oil pipe to the vacuum pump was not tightened to the correct torque during production.
Heavy Vehicle
5 Jan 2011
REC-003344
active0 MITSUBISHI PB Challenger
Due to a change in design of the carpet floor mat between 10MY and 11MY vehicles, it is possible that the incorrect mats may have been fitted to the PB model challenger vehicles at point of sale.
Light Vehicle
5 Jan 2011
REC-001453
active2008-2010 Volvo S80, V70, XC70 & XC60
The engine oil level may be above the maximum level marking. If the engine oil level is above maximum it may lead to increased engine speed.
Light Vehicle
5 Jan 2011
REC-000722
active2006-2010 JEEP Wrangler
The front fender liners on the vehicle may detach or sag allowing the fender liner to contact one or more of the brake tubes.
Light Vehicle
29 Dec 2010
REC-003345
active0 Scania K94 Bus in the 4 Series
There have been instances where the bellows brackets have fractured. The bellows brackets fracture at the upper torque rod attachment. This is because the suspension brackets side wall is approx. 10 mm narrower than specified dimension.
Heavy Vehicle
29 Dec 2010
REC-000467
active0 Holden VE Series II Sportswagon
In the event of emergency braking or vehicle collision, the rear seat assembly may not remain in the locked position and may move forward with the motion of the vehicle.
Light Vehicle
23 Dec 2010
REC-003343
active0 KAWASAKI Voyager, Nomad, Classic
The engine may stall under deceleration due to an improper setting of the Electroninc Control Unit (ECU).
Motorcycle
21 Dec 2010
REC-004877
active0 Volvo S60, XC60
The front power seat stop lugs may not be assembled according to specification.
Light Vehicle
21 Dec 2010