Search Recalls
Search by VIN, keyword, make, or filter by recall type, year, and vehicle category.
Search results
871 recalls found
REC-000553
active0 Honda CBR500R/CB500F
The float arm on the fuel pump level gauge may break off, due to reduced strength during usage.
Motorcycle
28 July 2015
REC-000552
active0 Honda 400cc to 1300cc MOTORCYCLES
Excessive sealant may have been applied to the starter solenoid during manufacture.
Motorcycle
16 July 2015
REC-003642
active0 HARLEY DAVIDSON TOURING MOTORCYCLES
The spring wire in the saddlebag mounting receptacle may not maintain adequate tension, allowing the mounting stud to possibly disengage from the receptacle.
Motorcycle
15 July 2015
REC-000554
active0 Honda 250cc to 650cc MOTORCYCLES
Excessive sealant may have been applied to the starter solenoid during manufacture.
Motorcycle
15 July 2015
REC-000804
active2013-2015 KTM 1290 Super Duke
Due to deviations in the manufacturing process, the internal overflow pipe in some fuel tanks may not be completely enclosed by plastic. This may lead to a fuel leak.
Motorcycle
6 July 2015
REC-001545
active0 YAMAHA YAMAHA WR250R/X
The stator may fail during high engine temperature conditions.
Motorcycle
30 June 2015
REC-001232
active0 SUZUKI VZR1800 Boulevard
The rear backrest mounting hardware kit(s) may have included four 110mm long mounting bolts, instead of two 75mm and two 95mm bolts.
Motorcycle
26 June 2015
REC-000261
active2013-2015 DUCATI Ducati 1199/1299 Panigale S
The internal nut retaining the piston to the rod might not be tightened to the specified torque.
Motorcycle
22 June 2015
REC-001334
active0 TRIUMPH Daytona and Speed Triple.
In some cases the piston-shaft nut has been incorrectly torqued, which may lead to a loss in damping control and a possible oil leak.
Motorcycle
14 May 2015
REC-000260
active2009-2014 DUCATI MULTISTRADA
The hose inside the sheath of the throttle opening Bowden cable may get stuck inside the throttle control, resulting in stiffening or locking of the throttle control assembly.
Motorcycle
26 Apr 2015
REC-003628
active0 HARLEY DAVIDSON TOURING
The hydraulic clutch system may exhibit a condition in which it may lose the ability to generate enough lift to disengage the clutch after being parked for an extended period.
Motorcycle
23 Apr 2015
REC-000551
active0 Honda CBR1000SE & CBR1000SF
The Pistion Nut on some Rear Cushion shock absorbers may not have been correctly tightened to specification when being manufactured.
Motorcycle
20 Apr 2015
REC-003627
active0 YAMAHA YZF-R1M
There is a risk that the rear shock absorber piston rod nut can loosen off due to insufficient tightening torque of the piston rod nut during assembly of some shock assemblies.
Motorcycle
16 Apr 2015
REC-000146
active2002-2011 BMW K25-29, K40, K43 & K44 SERIES
During maintenance work on brake discs or wheel changes, threaded fasteners might have been overtightened to torques not in compliance with the values set out in the repair instructions or operating instructions.
Motorcycle
7 Apr 2015
REC-003621
active0 YAMAHA MT09AF/F/TRAF
The shift cam segment stopper on the shift lever was produced out of specification. After continued operation it may develop cracking from fatigue in the corner radius of the stopper due to concentrated stress.
Motorcycle
1 Apr 2015
REC-000800
active2014-2015 KTM 690 ENDURO, SMC R
KTM discovered that the rear ABS brake line of the 690 ENDURO R and 690 SMC R models of model year 2015 have possibly been damaged while mounting the spring band clamps of the engine ventilation tube. Even without this pre-existing defect, subsequent damage caused by vibrations at the contact point as well as a sudden braking pressure loss, with resultant total failure of the rear brake, cannot be excluded.
Motorcycle
26 Mar 2015
REC-000802
active2014-2015 KTM 690 SMC R
It was determined that in some cases the spacers of the 690 ENDURO R where installed on the front wheel of the 690 SMC R. These spacers are 4.4mm shorter and the resulting play can cause the wheel to move axially on the front wheel spindle.
Motorcycle
26 Mar 2015
REC-001273
active0 SUZUKI UH200L4
Suzuki Motor Corporation has advised that the muffler body may have crack and broken away from the exhaust pipe due to incorrect construction.
Motorcycle
16 Mar 2015
REC-005095
active0 INDIAN MOTORCYCLES Indian Scout Motorcycles
In some vehicles, the piston retaining ring located in the rear master cylinder may not fully seat into the machined groove in the master cylinder bore. Motorcycles assembled with an affected master cylinder may experience a loss of fluid pressure to the rear brake caliper resulting in rear brake failure.
Motorcycle
12 Mar 2015
REC-000152
active0 BRP Can-Am Spyder RT roadster
Under very hot ambient conditions and low speed riding, the temperature in the engine compartment may rise.
Motorcycle
19 Feb 2015