Search Recalls
Search by VIN, keyword, make, or filter by recall type, year, and vehicle category.
Search results
3,634 recalls found
REC-003022
active0 Mercedes-Benz Vito Type 639
In the event of a severe accident the fuel tank could develop a leak.
Light Vehicle
4 Sept 2007
REC-003023
active0 Mercedes-Benz M Class (Type 164) & R Class (Type 251)
During the production process, one or both of the accelerator pedal securing nuts may not have been fitted correctly or are missing.
Light Vehicle
4 Sept 2007
REC-003021
active0 Mercedes-Benz Sprinter type 906
The plug contact at the positive terminal of relay socket No. 3 may have been widened due to a production error.
Light Vehicle
4 Sept 2007
REC-000773
active2001-2002 KIA Sportage (JA)
There is a possibility the radiator cooling fan blade may break, damaging the radiator and causing possible engine damage.
Light Vehicle
27 Aug 2007
REC-003018
active0 Renault Trafic II
The airbag computer is configured without the passenger pretensioner although it is fitted, so in the event of an impact, the pretensioner cannot be triggered.
Light Vehicle
26 Aug 2007
REC-003019
active0 CITROEN C4 Picasso
The functioning of the front seat belts may be affected and the means of restraint diminished.
Light Vehicle
24 Aug 2007
REC-005273
active0 MASERATI Quattroporte
A bug in the electronic software.
Light Vehicle
16 Aug 2007
REC-003012
active0 HYUNDAI Elantra (HD)
Warning label missing on the spare wheel.
Light Vehicle
6 Aug 2007
REC-003010
active0 Mercedes-Benz Sprinter Van 906
Investigations have revealed that a windowbag with a defective gas diffuser may have been installed in the vehicle and must be replaced. The diffuser connects the gas generator to the airbag and distributes the expanding air into the airbag following ignition. A faulty diffuser may have irregularities in its composition and hairline cracks which could lead to premature breakage of the diffuser when the airbag is triggered. In a worst case scenario the gas generator can separate from the windowbag module and the airbag is insufficiently inflated. In addition, this separation may also cause parts of the windowbag module or the vehicle's interior panelling to be ejected at high speed into the passenger compartment.
Light Vehicle
6 Aug 2007
REC-003006
active0 Ford Fiesta (WQ)
Vehicles may have sustained damage to the steering column upper universal joint during the shipping process to the vehicle production plant.
Light Vehicle
6 Aug 2007
REC-003011
active0 Mercedes-Benz Sprinter Van 906
Investigations have revealed that a windowbag with a defective gas diffuser may have been installed in the vehicle and must be replaced. The diffuser connects the gas generator to the airbag and distributes the expanding air into the airbag following ignition. A faulty diffuser may have irregularities in its composition and hairline cracks which could lead to premature breakage of the diffuser when the airbag is triggered. In a worst case scenario the gas generator can separate from the windowbag module and the airbag is insufficiently inflated. In addition, this separation may also cause parts of the windowbag module or the vehicle's interior panelling to be ejected at high speed into the passenger compartment.
Light Vehicle
6 Aug 2007
REC-003008
active0 JEEP Cherokee (KJ)
Under certain operating conditions it is possible that the HVAC blower motor could overheat and, in an extreme case, may even ignite.
Light Vehicle
6 Aug 2007
REC-003009
active0 Mercedes-Benz Sprinter Van 906
Investigations have revealed that a windowbag with a defective gas diffuser may have been installed in the vehicle and must be replaced. The diffuser connects the gas generator to the airbag and distributes the expanding air into the airbag following ignition. A faulty diffuser may have irregularities in its composition and hairline cracks which could lead to premature breakage of the diffuser when the airbag is triggered. In a worst case scenario the gas generator can separate from the windowbag module and the airbag is insufficiently inflated. In addition, this separation may also cause parts of the windowbag module or the vehicle's interior panelling to be ejected at high speed into the passenger compartment.
Light Vehicle
3 Aug 2007
REC-003007
active0 JEEP JK Wrangler
Investigations have shown that the Totally Integrated Power Module was programmed with incorrect software that may allow the engine to stall under certain operating conditions.
Light Vehicle
30 July 2007
REC-003002
active0 VOLKSWAGEN Caddy
On Caddy vehicles of the affected chassis number ranges the spring clamps on the rear axle may break because of poor heat treatment.
Light Vehicle
30 July 2007
REC-002998
active0 ALFA ROMEO 147 1.9 Multijet
To check that the layout of the fuel supply pipe from the diesel filter to the high pressure pump is correct to prevent possible interference between the actual pipe and the fuel filter mounting.
Light Vehicle
26 July 2007
REC-003001
active0 MITSUBISHI NS Pajero (Automatic)
There is a possibility that the bolt welded to the manual control lever (mounted on the automatic transmission) may develop a crack when the shift cable attaching nut is tightened. If this occurs, the shift cable attaching nut torque may be reduced allowing the shift cable to move. This can result in an indicated shift position which is different to the gearshift position at the transmission. In a worse case condition if the driver selects P and or N position, actual shift position at the transmission may be R or D. If this occurs, there is a possibility of unexpected vehicle movement if the accelerator is depressed in this situation.
Light Vehicle
24 July 2007
REC-003000
active0 Mercedes-Benz S Class (220), CL Class (215)
Investigations have revealed that corrosion in the steel braiding of an ABC hydraulic hose may occur over time when exposed to moisture and heat. This could in turn lead to oil leaks in the vicinity of hot engine components.
Light Vehicle
16 July 2007
REC-002997
active0 ALFA ROMEO 147 1.9 Multijet
To check that the layout of the fuel supply pipe from the diesel filter to the high pressure pump is correct to prevent possible interference between the actual pipe and the fuel filter mounting.
Light Vehicle
11 July 2007
REC-002996
active0 Mazda Mazda3 MPS
A bolt securing the engine and transmission assembly to one of its mounting points may loosen over time. In the worst case scenario, if the bolt comes out or breaks, the engine and transmission assembly may drop. This may detach the driveshaft, resulting in the vehicle being unable to be driven.
Light Vehicle
6 July 2007