Skip to content

Data sourced from official Australian recall publishers. RecallAU is an independent service, not a government website.

recallau
🚗

Vehicle Recalls

5,507 recalls from vehiclerecalls.gov.au

Cars, trucks, motorcycles, trailers, and caravans affected by safety defects.

Vehicle Recalls results

vehicle

REC-005353

active

2004 KAWASAKI KLX110-A4 Motorcycle

On some eligible units a wrong O-ring was installed on the shock absorber.

Motorcycle

22 Nov 2004

vehicle

REC-002691

active

0 CHRYSLER Voyager (RG)

There is a possibility the upper power steering return hose may split and leak hydraulic fluid in the engine compartment.

Light Vehicle

22 Nov 2004

vehicle

REC-002689

active

0 Scania various

Emissions plates with wrong smoke data have been attached to rocker covers engines DC16 03.

Heavy Vehicle

22 Nov 2004

vehicle

REC-002688

active

0 Kenworth Various

Instances have occurred where a truck's power supply has been shut down due to the roll-over sensor tripping in other than roll-over situations. Should the Battery Isolation switch be turned off by the sensor, all electrical power is lost.

Heavy Vehicle

15 Nov 2004

vehicle

REC-000435

active

0 Holden ZC Vectra

The exhaust clamp used to secure the middle muffler to the front exhaust pipe may loosen during operation and allow the muffler to separate from the front pipe.

Light Vehicle

8 Nov 2004

vehicle

REC-002692

active

0 MITSUBISHI Magna

The firewall silencer mat may retain moisture that then causes corrosion where it is in contact with the fuel pipe. In worst case due to the corrosion the fuel pipe may become perforated causing a fuel leak in the engine bay of the vehicle.

Light Vehicle

28 Oct 2004

vehicle

REC-002685

active

0 Scania Various

When braking using the retarder in vehicles equipped with EDC and Scania retarder but without ABS, it is possible to disengage the retarder by activating the accelerator pedal. The retarder is reactivated when the accelerator pedal is released.

Heavy Vehicle

28 Oct 2004

vehicle

REC-002683

active

0 Mitsubishi Truck Canter, 8 tonne GVM

The brake booster intensifier may have an incorrectly machined groove on the hydraulic piston, where the piston cup is located. The incorrect machining may cause insufficient sealing at the piston cup area and repeated brake application and release could cause a mechanical malfunction.

Heavy Vehicle

28 Oct 2004

vehicle

REC-002684

active

0 Scania K/EB Buses

Cases have been reported of the intermediate droparm's nut coming loose due to the tab that secures the lock washer in the shaft breaking. The result is slack in the buses steering system.

Heavy Vehicle

25 Oct 2004

vehicle

REC-005332

active

2001-2003 Ford UT and UX Explorer

Some 2002 affected vehicles are fitted with a ball stud bracket located on the rear liftgate window which could rotate out of position on the glass. Additionally, all affected vehicles (2002/2003) are fitted with a hinge that attaches the liftgate window.

Light Vehicle

19 Oct 2004

vehicle

REC-002682

active

0 JAGUAR X Type

When the vehicle is parked on an incline, with the handbrake on and the vehicle out of gear, there is the possibility that the vehicle could roll away sometime later.

Light Vehicle

18 Oct 2004

vehicle

REC-002677

active

0 KIA Mentor, Shuma

The front seatbelts may not latch correctly.

Light Vehicle

17 Oct 2004

vehicle

REC-002678

active

0 KIA Sportage

The front seatbelts may not latch correctly.

Light Vehicle

17 Oct 2004

vehicle

REC-002676

active

0 LAND ROVER Range Rover V8

The affected vehicles have been fitted with an unrestricted fuel filler neck and will be recalled to have a restricted fuel filler neck fitted.

Light Vehicle

7 Oct 2004

vehicle

REC-002680

active

0 YAMAHA XV250, XVS250, PW80, TTR90, TT90E

A possible safety related condition may exist in the rear brake shoe assemblies fitted to the affected models. The rear brake shoe friction material may separate from the shoe, resulting in reduced braking performance.

Motorcycle

7 Oct 2004

vehicle

REC-002673

active

0 PEUGEOT 206

BSI Software Download. This action is necessary to eliminate the possible inadvertent continuous activation of the horn after pressing the high frequency button on the vehicles remote locking plip. This activation my cause destruction of the horn.

Light Vehicle

6 Oct 2004

vehicle

REC-000433

active

0 Holden Jackaroo

The throttle cable seal may deteriorate over time, and stick to the inner cable. If the seal sticks to the inner cable, it is possible that the engine speed may not reduce when the accelerator is released.

Light Vehicle

6 Oct 2004

vehicle

REC-002729

active

0 SUBARU Impreza WRX, Impreza STI

The AVCS Oil Flow control Valve. The potential safety issue is related to the possibility of an oil leak due to insufficient tightening of bolts that secure the valve cover plates.

Light Vehicle

6 Oct 2004

vehicle

REC-002675

active

0 PEUGEOT 206

Software Download for Engine ECU. This action is necessary to eliminate oscillation of the motorized throttle valve which, in extremely rare cases, may cause breakage of the throttle stop. As a result, the engine may be placed in the emergency program phase.

Light Vehicle

5 Oct 2004

vehicle

REC-002674

active

0 PEUGEOT 307

Download Engine ECU Software. This action is necessary to eliminate oscillation of the motorized throttle valve which, in extremely rare cases, may cause breakage of the throttle stop. As a result, the engine may be placed in the emergency program phase.

Light Vehicle

5 Oct 2004

vehicle

REC-002670

active

0 JAGUAR XJ, S Type & X Type

This vehicle had a speed restriction label on the space saver spare wheel replaced due to poor adhesion of the label to the wheel.

Light Vehicle

5 Oct 2004

vehicle

REC-002679

active

0 TRIUMPH Bonneville range, Thruxton models

A rear suspension unit on the affected model may have been incorrectly manufactured. The Company will replace both rear suspension units on all models affected.

Motorcycle

1 Oct 2004

vehicle

REC-002672

active

0 MITSUBISHI TL Magna, KL Verada

During the pressing process variations in material properties may have contributed to the formation of splits on both ends of the rear lower suspension arm. Mitsubishi advise that the fatigue life of the component is reduced.

Light Vehicle

1 Oct 2004

vehicle

REC-002681

active

0 Toyota Celica

In the brake master cylinder there is a possibility that the recess that retains the rubber seal ring, located at the end of the cylinder body, may be corroded due to an improper washing process during component assembly. In this condition, brake fluid may leak.

Light Vehicle

28 Sept 2004

← PreviousPage 175 of 230Next →