Search Recalls
Search by VIN, keyword, make, or filter by recall type, year, and vehicle category.
Search results
5,459 recalls found
REC-002880
active0 Honda Odyssey
Poor contact between the ignition switch contacts which may lead to arcing causing burning of the contacts and increased electrial resistance. As a result, this may interrupt the ignition switch circuit and cause the engine to stall. Additionally, heat generated due to increased resistance may melt solder within the switch and may fall into the drivers footwell.
Light Vehicle
4 Sept 2006
REC-002879
active0 Honda CR-V, Integra, Civic 4 door, Civic 5 door,
Throughout the manufacturing process of the ignition switch, the ignition switch interlock lever may have been contaminated with foreign matter. If the interlock lever is contaminated, the possibility of the ignition key being removed from the ignition switch when the selector lever is not in the Park position exists. As a result, there is a potential the vehicle may move without warning if the handbrake is not applied.
Light Vehicle
4 Sept 2006
REC-002904
active0 Toyota Surf 130 Series
The nature of the defect relates to the steering relay rod, which potentially may develop a fatigue crack on the bend in the rod near the Pitman arm ball joint connection.
Light Vehicle
31 Aug 2006
REC-002850
active0 Toyota Surf
The nature of the defect relates to the steering relay rod, which potentially may develop a fatigue crack on the bend in the rod near the Pitman arm ball joint connection.
Light Vehicle
31 Aug 2006
REC-002848
active0 Toyota Surf
The nature of the defect relates to the steering relay rod, which potentially may develop a fatigue crack on the bend in the rod near the Pitman arm ball joint connection.
Light Vehicle
31 Aug 2006
REC-002849
active0 Toyota Surf
The nature of the defect relates to the steering relay rod, which potentially may develop a fatigue crack on the bend in the rod near the Pitman arm ball joint connection.
Light Vehicle
31 Aug 2006
REC-005268
active0 NISSAN D40 Navara
A concern has been detected related to incorrect assembly and manufacture of the rear axle assembly. This issue may result in excessive wear of the rear wheel bearings that will lead to noise occurring from the rear axle. If this is not rectified the bearings could ultimately fail resulting in the half shaft assembly becoming detached from the axle.
Light Vehicle
29 Aug 2006
REC-002903
active0 BENTLEY Continental GT
There is the potential for a foul to occur between a brake pipe and an engine mounted hose clip, which could eventually result in failure of the brake pipe. This failure could result in a loss of brake fluid which may lead to an increased stopping distance under braking. In addition, there is a risk of fire due to brake fluid escaping into the engine compartment.
Light Vehicle
28 Aug 2006
REC-000064
active2003–2004 BENTLEY Arnage R, RL, T, LWB & Limousine
There is the potential for a foul to occur between a brake pipe and an engine mounted hose clip, which could eventually result in failure of the brake pipe. This failure could result in a loss of brake fluid which may lead to an increased stopping distance under braking. In addition, there is a risk of fire due to brake fluid escaping into the engine compartment.
Light Vehicle
28 Aug 2006
REC-002906
active0 TRIUMPH Sprint ST (1050cc), Sprint ST ABS (1050cc), Speed Triple (1050cc) & Daytona
A potential problem with the reara brake caliper carrier positioning stud (stop bolt) which could result in brake caliper carrier movement, thereby possibly causing damage to the rear swing arm.
Motorcycle
24 Aug 2006
REC-002905
active0 AUDI A3
There is a possibility that in isolated cases a gradual loss of gas can occur in the gas generator for the curtain airbags, thereby causing the airbag not to inflate when required.
Light Vehicle
24 Aug 2006
REC-002900
active0 Mercedes-Benz VITO & VIANO
The manufacturer has advised of a possible software fault in the SRS control unit which, if present, could prevent the generation of a crash signal in the event of a rear end collision.
Light Vehicle
10 Aug 2006
REC-002901
active0 BUELL XB12R Ulysses
Either the pivot bolt for the sidestand leg or the mounting bracket bolts could break (possibly without notice) and could cause the motorcycle to fall.
Motorcycle
10 Aug 2006
REC-002937
active0 FIAT Ducato van
Due to an oversight that may have occurred in production some vans were not fitted with rear mudflaps in accordance to the certification specification.
Light Vehicle
10 Aug 2006
REC-002892
active0 FIAT DUCATO
Due to an oversight that may have occurred in production some vans were not fitted with rear mudflaps in accordance to the certification specification.
Light Vehicle
9 Aug 2006
REC-002899
active0 SUZUKI CARRY
After high frequency use of the ignition switch there is a potential for failure of the switch contacts. Should the contacts fail, it could lead to the starter motor continuing to run even after switch release. This condition could lead to abnormal high current draw causing the switch to overheat. In an extreme case, the wiring harness or switch may catch fire.
Light Vehicle
9 Aug 2006
REC-004840
active0 KTM 990 ADVENTURE
Water leaking into the ABS switch in the cockpit can lead to the malfunction of the switch and in some cases to a failure of the speed indicator.
Motorcycle
8 Aug 2006
REC-000443
active2003–2005 Holden XC BARINA, COMBO & TIGRA
A condition can occur where water may enter the Anti-Lock Brake System (ABS) wiring connector via the earth lead.
Light Vehicle
7 Aug 2006
REC-000683
active2005–2006 JAYCO Unknown
Some air conditioners may not comply with the requirements of the consumer product safety standard for electrical installation. The power supply fitted under the chassis floor may not have conduit fitted to protect it as required by the regulations for electrical installation.
Caravan/Motorhome
2 Aug 2006
REC-002898
active0 Scania BUS
There have been instances of leakage from the return fuel line on ethanol-driven buses with a DSI9E engine.
Heavy Vehicle
21 July 2006