ISUZU N SERIES Recalls

2018–2021 ISUZU N SERIES

Due to a manufacturing issue with a hose in the automatic transmission, fluid may leak from the transmission which could result in a loss of motive power.

2019–2020 ISUZU N SERIES

The driving light switch receives power when the lights are on, when it should only receive power when the lights are on high beam. This means that the driving lights may be on when the vehicle operator only intends side lights or low beam.

0 ISUZU N Series

During the fitting of the tow ball, the securing nut may have had insufficient torque applied. This could cause the securing nut to come loose. In the worst case, the tow ball could detach and cause an accident.

2006–2007 ISUZU N Series

The eye bolt securing the oil pipe to the vacuum pump was not tightened to the correct torque during production.

0 ISUZU N Series

During the initial charging of the CNG fuel tank, by lowering the temperature of the gas, cracks developed in the soluble alloy of the safety valve. Subsequent charging of the fuel tank in the field resulted in the cracks becoming penetrating cracks. If a vehicle is used under such conditions it is possible that gas can leak from the safety valve.

2008 ISUZU N Series

Some of the vehicles may have received a propeller shaft with insufficient high frequency heat treatment. Due to inadequate high frequency heat treatment on the base of the propeller shaft slide yoke spline, the propeller shaft may lack the designed strength and a crack may occur in this area.

2005–2007 ISUZU N Series

The fault relates to a possible diesel fuel seep or leak from the linkage pipe at the upper or lower fuel port on the diesel fuel supply pump.